Inconel 600 Pipe
Get the Exact Sizes of ASTM B163 UNS N06600 Seamless Tube as Per Request. Compare Our Price With Other Inconel 600 Pipe Suppliers in India. Call for Cut to Length and Free Cutting Service.
Nickel Alloys
On This Page
Mechanical Behaviour of Inconel 600 Boiler TubeEquivalent of Inconel Alloy 600 Capillary TubingAlloy 600 Pipe Physical PropertiesInconel 600 Welded Tubing Dimension ChartStandards of Inconel Din 2.4816 Welded TubePressure rating of Inconel Alloy 600 tubingWall Thickness of Nickel 600 TubingGauge Chart of Alloy 600 TubingInconel 600 Tube SizesASTM B163 UNS N06600 Tube Application and Temperature Range
Gallery
Inconel 600 Pipe in Detail
Specification
Features & Applications
Werkstoff NR. 2.4816 ASTM Standard
- ASTM B163
- ASTM B167
- ASTM B829
Nickel Alloy 625 SMLS Pipes Density
- 8.47 g/cm3
- 0.306 lb/in.3
AMS 5580 Annealed Pipe Melting Point
- 1354 - 1413 °C
- 2470 - 2575 °F
EN 2.4816 Round Pipe Specific Heat
- 0.106 Btu/lb-°F
- 444 J/kg-°C
DIN 2.4816 Square Pipe Electrical Resistivity
- 620 ohm-circ mil/ft
- 1.03 μΩ-m
WNR 2.4816 Rectangular Pipe Curie Temperature
- -124 °C
- -192 °F
2.4816 Inconel 600 Bright Annealed Pipe Poisson's Ratio
- 0.29
Nickel 600 Solution Annealed Pipe UNS
- N06600
UNS 6600 Seam Welded Pipe Dimensional Standard
- SUS
- JIS
- ASTM
- EN
- DIN
- GB
Inconel 600 Clad Pipe Equivalent standards
- UNS N06600
- Old British : NA 13
- Euronorm : NiCr15Fe
- GOST : МНЖМц
- Japanese : NCF 600
- AFNOR : NC15FE11M
ASTM B167 Inconel 600 Seamless Tube Tensile Strength
- 95000 psi
- 655 Mpa
According to
- ASME B36.19
- ASME B36.10
Alloy 600 Cold Drawn Pipe Surface Finish
- Pickled
- Precleaned
- Passivated
- Cleaned
Yield Strength
- 45000 psi
- 310 Mpa
Specific Heat
- 0.106 Btu/lb°F
- 444 J/kg-°C
Supporting documents for AMS 5580 Hot Finished Pipe
- MTC EN 10204 3.1/3.2
- Inspection reports
- Origin
- Labeling verification
- Check List
- Inspection plan
Specifications
- ASTM B775
- ASTM B167
- AMS 5580
- ASTM B516
- ASTM B829
- ASTM B751
- ASTM B517
- ASTM B163
International Specifications
- DIN 17754
- DIN 17750
- BS 3072-3076
- AFNOR-NC 15 Fe
- TÜV 305
- DIN 17742
- WERKSTOFF Nr 2.4816
Heat Treatment for UNS N06600 Solution Annealed Pipe
- +LC
- +SRA
- Q+T
- +A
- +N
EN 2.4816 Cold Finished Seamless Pipe End
- Beveled
- Plain Ends
- Threaded Ends
- Square Ends
Testing requirements for WNR 2.4816 Hot Finished Seamless Pipe
- Ultrosonic test
- 100% eddy current test
- 100% Radiographic Test
Nickel 600 Solution Annealed Pipe Finishing Treatment
- Cold Finished
- Hot Finished
Nickel 600 Cold Finished Pipe Manufacturing Types
- Electric Resistance Welded
- LSAW
- EFW
- CDW
- Seamless
- CEW
- Fabricated
- Welded
- DOM
AMS 5580C Exhaust Pipe Form
- Coiled
- Rectangular
- Round
- Hollow
- Hydraulic
- Square
- Straight
- U Shape
Nickel 625 Exhaust Pipe Services
- Cut to Length
- Threading
- Welding
- Machining
- Beveling
2.4816 Inconel 600 Bright Annealed Pipe Length
- Single
- Standard
- Double Random
- Cut Length
Origin standards
- American
- European
- Russia
- Janpanese
Marking
- Schedule or Wall Thickness
- Nominal Size
- Specification
- Manufacturer’s Name
- Heat Number
- Material Grade
- Method of Manufacturing
Inconel 600 Seamless Tube Testing
- X-Ray
- UT
- Dye Penetrant
- Micro and MacroTest
- PMI Testing
- Hardness Test
- Chemical Analysis
- IGC Test
- Flaring Test
- Flattening Test
- Pitting Resistance Test
- Mechanical Testing
Inconel 600 Pipe Packaging
- Crates
- Bundles
- Wooden Boxes
- Custom
- Wrapped in plastic
- PE Fabric Bundles
Alloy 600 SMLS Pipe Equipment
- Sand-blasting machine
- Bending machine
- Press machine
- Electric bevelling machine
- Pushing Machine
Inconel Alloy 600 Cold Drawn Pipe Welding Method
- SMAW
- GMAW
- MIG
- MAG
- FCAW
- TIG
Certification of Nickel Alloy 600 Seam Welded Pipe
- DFARS compliant
- MTC EN 10204 3.1/3.2
- Raw Materials Certificate
- Third Party Inspection Report
- Heat Treatment Charts
- HS Code
- Commercial Invoice
- Form A for GSP
Available As
Inconel 600 Cold Drawn PipeAlloy 600 Annealed PipeUNS N06600 Seamless PipeInconel Alloy 600 Welded PipeNickel Alloy 600 Cold Finished Seamless PipeWerkstoff Nr. 2.4816 Bright Annealed PipeUNS N06600 Rectangular PipeAMS 5580 Exhaust PipeEN 2.4816 Seam Welded PipeDin 2.4816 Hot Finished PipeWnr 2.4816 Solution Annealed Pipe2.4816 Inconel 600 Round PipeNickel 600 Cold Finished PipeUNS 6600 Square PipeASTM B163 UNS N06600 Seam Welded PipeASME SB163 UNS N06600 Clad PipeASTM B163 N06600 Hot Finished Seamless Pipe
Technical Data
Full Specifications
›Material Properties
Mechanical Behaviour of Inconel 600 Boiler Tube
| Element | Density | col_3 | Yield Strength | Elongation |
|---|---|---|---|---|
| Element | 8.47 g/cm3 | 45000 Psi 310 MPa | Elongation | |
| Inconel 600 | Melting Point | Tensile Strength | 40 % | |
| Inconel 600 | 1413 °C (2580 °F) | 95000 Psi 655 MPa | 40 % |
›Technical Data
Equivalent of Inconel Alloy 600 Capillary Tubing
Scroll to see all columns →
| STANDARD | WERKSTOFF NR. | North Americal (UNS) | Japan | British Standard | Rissia | France | Europe |
|---|---|---|---|---|---|---|---|
| Inconel 600 | 2.4816 | N06600 | NCF 600 | NA 13 | МНЖМц 28-2,5-1,5 | NC15FE11M | NiCr15Fe |
Inconel 600 Tube Sizes
| Pipe WT / milimeter | Pipe OD / milimeter | Sched | inches | Kilogram/meter |
|---|---|---|---|---|
| 1.65 | 13.72 | 10S | 1/4 | 0.50 |
| 3.02 | 13.72 | 80S | 1/4 | 0.81 |
| 2.31 | 17.15 | 40S | 3/8 | 0.86 |
| 2.11 | 21.34 | 10S | 1/2 | 1.02 |
| 3.73 | 21.34 | 80S | 1/2 | 1.65 |
| 2.87 | 26.67 | 40S | 3/4 | 1.71 |
| 2.77 | 33.40 | 10S | 1 | 2.13 |
| 4.55 | 33.40 | 80S | 1 | 3.29 |
| 2.77 | 42.16 | 10S | 1¼ | 2.73 |
| 4.85 | 42.16 | 80S | 1¼ | 4.53 |
| 2.77 | 48.26 | 10S | 1½ | 3.16 |
| 5.08 | 48.26 | 80S | 1½ | 5.49 |
| 3.91 | 60.33 | 40S | 2 | 5.52 |
| 3.05 | 73.03 | 10S | 2½ | 5.35 |
| 7.01 | 73.03 | 80S | 2½ | 11.59 |
| 7.62 | 88.90 | 80S | 3 | 15.51 |
| 3.05 | 101.60 | 10S | 3½ | 7.53 |
| 8.08 | 101.60 | 80S | 3½ | 18.92 |
| 6.02 | 114.30 | 40S | 4 | 16.32 |
| 6.55 | 141.30 | 40S | 5 | 22.10 |
| 3.4 | 168.28 | 10S | 6 | 14.04 |
| 10.97 | 168.28 | 80S | 6 | 43.21 |
| 8.18 | 219.08 | 40S | 8 | 43.20 |
| 12.7 | 219.08 | 80S | 8 | 65.63 |
Alloy 600 Pipe Physical Properties
| Density / Specific Gravity | 8.47 kg/m³ |
|---|---|
| Melting Point | 1370-1425 ℃ |
Standards of Inconel Din 2.4816 Welded Tube
| col_1 | col_2 | col_3 |
|---|---|---|
| UNS: | Specifications: | international Specifications: |
| N06600 | ASTM B167 B829 B517 B775 B163 B516 B751 AMS 5580 | BS 3072-3076 TÜV 305 DIN 17742 AFNOR-NC 15 Fe DIN 17750 DIN 17754 WERKSTOFF Nr 2.4816 |
Wall Thickness of Nickel 600 Tubing
| Types of Inconel 600 Tube | Wall thickness | Out diameter (OD) |
|---|---|---|
| NB Sizes | SCH 5 SCH 10 SCH 40 SCH 80 SCH 160 | 1/8" - 8" |
| (in Stock + Custom Sizes) | 1.0 - 15.0 mm | 5 - 1219.2 mm |
| (Custom Sizes) | As per requirement | 5 - 203.2 mm |
Gauge Chart of Alloy 600 Tubing
| AUGE | TYPICAL VALUE (inch) | THICKNESS RANGE (inch) |
|---|---|---|
| 22 | .028 | .025 to .029 |
| 20 | .035 | .031 to .035 |
| 19 | .042 | .038 to .042 |
| 18 | .049 | .044 to .049 |
| 17 | .058 | .053 to .058 |
| 16 | .065 | .060 to .065 |
| 15 | .072 | .066 to .074 |
| 14 | .083 | .075 to .085 |
| 13 | .095 | .087 to .097 |
| 12 | .109 | .101 to .111 |
| 11 | .12 | .112 to .122 |
| 10 | .134 | .126 to .136 |
| 9 | .148 | .140 to .150 |
| 8 | .165 | .157 to .167 |
| 7 | .18 | .175 to .185 |
ASTM B163 UNS N06600 Tube Application and Temperature Range
| Material | Application | Recommended Temperature Range |
|---|---|---|
| Inconel Alloy 600 Pipe | Suggested for Use with Generally Corrosive Media in High Temperature Applications | -205°F to 1200°F -130°C to 650°C |
›Dimensions & Weight
Inconel 600 Welded Tubing Dimension Chart
Scroll to see all columns →
| TUBE O.D. | TUBE GAUGE | TUBE GAUGE_2 | TUBE GAUGE_3 | TUBE GAUGE_4 | TUBE GAUGE_5 | TUBE GAUGE_6 | TUBE GAUGE_7 | TUBE GAUGE_8 | TUBE GAUGE_9 | TUBE GAUGE_10 | TUBE GAUGE_11 | TUBE GAUGE_12 | TUBE GAUGE_13 | TUBE GAUGE_14 | TUBE GAUGE_15 | TUBE GAUGE_16 | TUBE GAUGE_17 | TUBE GAUGE_18 | TUBE GAUGE_19 | TUBE GAUGE_20 | TUBE GAUGE_21 | TUBE GAUGE_22 | TUBE GAUGE_23 | TUBE GAUGE_24 | TUBE GAUGE_25 | TUBE GAUGE_26 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TUBE O.D. | 00 | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 |
| TUBE O.D. | WALL THICKNESS (INCHES) | WALL THICKNESS (INCHES) | WALL THICKNESS (INCHES) | WALL THICKNESS (INCHES) | WALL THICKNESS (INCHES) | WALL THICKNESS (INCHES) | WALL THICKNESS (INCHES) | WALL THICKNESS (INCHES) | WALL THICKNESS (INCHES) | WALL THICKNESS (INCHES) | WALL THICKNESS (INCHES) | WALL THICKNESS (INCHES) | WALL THICKNESS (INCHES) | WALL THICKNESS (INCHES) | WALL THICKNESS (INCHES) | WALL THICKNESS (INCHES) | WALL THICKNESS (INCHES) | WALL THICKNESS (INCHES) | WALL THICKNESS (INCHES) | WALL THICKNESS (INCHES) | WALL THICKNESS (INCHES) | WALL THICKNESS (INCHES) | WALL THICKNESS (INCHES) | WALL THICKNESS (INCHES) | WALL THICKNESS (INCHES) | WALL THICKNESS (INCHES) |
| TUBE O.D. | 0.380 | 0.340 | 0.300 | 0.284 | 0.259 | 0.238 | 0.220 | 0.203 | 0.180 | 0.165 | 0.148 | 0.134 | 0.120 | 0.109 | 0.095 | 0.083 | 0.072 | 0.065 | 0.058 | 0.049 | 0.042 | 0.035 | 0.032 | 0.028 | 0.025 | 0.022 |
| TUBE O.D. | TUBE I.D. | TUBE I.D. | TUBE I.D. | TUBE I.D. | TUBE I.D. | TUBE I.D. | TUBE I.D. | TUBE I.D. | TUBE I.D. | TUBE I.D. | TUBE I.D. | TUBE I.D. | TUBE I.D. | TUBE I.D. | TUBE I.D. | TUBE I.D. | TUBE I.D. | TUBE I.D. | TUBE I.D. | TUBE I.D. | TUBE I.D. | TUBE I.D. | TUBE I.D. | TUBE I.D. | TUBE I.D. | TUBE I.D. |
| 1/4″ | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | 0.010 | 0.032 | 0.060 | 0.084 | 0.106 | 0.120 | 0.134 | 0.152 | 0.166 | 0.180 | 0.186 | 0.194 | 0.200 | 0.206 |
| 3/8″ | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | 0.015 | 0.045 | 0.079 | 0.107 | 0.135 | 0.157 | 0.185 | 0.209 | 0.231 | 0.245 | 0.259 | 0.277 | 0.291 | 0.305 | 0.311 | 0.319 | 0.325 | 0.331 |
| 1/2″ | N/A | N/A | N/A | N/A | N/A | 0.024 | 0.060 | 0.094 | 0.140 | 0.170 | 0.204 | 0.232 | 0.260 | 0.282 | 0.310 | 0.334 | 0.356 | 0.370 | 0.384 | 0.402 | 0.416 | 0.430 | 0.436 | 0.444 | 0.450 | 0.456 |
| 5/8″ | N/A | N/A | 0.025 | 0.057 | 0.107 | 0.149 | 0.185 | 0.219 | 0.265 | 0.295 | 0.329 | 0.357 | 0.385 | 0.407 | 0.435 | 0.459 | 0.481 | 0.495 | 0.509 | 0.527 | 0.541 | 0.555 | 0.561 | 0.569 | 0.575 | 0.581 |
| 3/4″ | N/A | 0.070 | 0.150 | 0.182 | 0.232 | 0.274 | 0.310 | 0.344 | 0.390 | 0.420 | 0.454 | 0.482 | 0.510 | 0.532 | 0.560 | 0.584 | 0.606 | 0.620 | 0.634 | 0.652 | 0.666 | 0.680 | 0.686 | 0.694 | 0.700 | 0.706 |
| 7/8″ | 0.115 | 0.195 | 0.275 | 0.307 | 0.357 | 0.399 | 0.435 | 0.469 | 0.515 | 0.545 | 0.579 | 0.607 | 0.635 | 0.657 | 0.685 | 0.709 | 0.731 | 0.745 | 0.759 | 0.777 | 0.791 | 0.805 | 0.811 | 0.819 | 0.825 | 0.831 |
| 1″ | 0.240 | 0.320 | 0.400 | 0.432 | 0.482 | 0.524 | 0.560 | 0.594 | 0.640 | 0.670 | 0.704 | 0.732 | 0.760 | 0.782 | 0.810 | 0.834 | 0.856 | 0.870 | 0.884 | 0.902 | 0.916 | 0.930 | 0.936 | 0.944 | 0.950 | 0.956 |
| 1 1/8″ | 0.365 | 0.445 | 0.525 | 0.557 | 0.607 | 0.649 | 0.685 | 0.719 | 0.765 | 0.795 | 0.829 | 0.857 | 0.885 | 0.907 | 0.935 | 0.959 | 0.981 | 0.995 | 1.009 | 1.027 | 1.041 | 1.055 | 1.061 | 1.069 | 1.075 | 1.081 |
| 1 1/4″ | 0.490 | 0.570 | 0.650 | 0.682 | 0.732 | 0.774 | 0.810 | 0.844 | 0.890 | 0.920 | 0.954 | 0.982 | 1.010 | 1.032 | 1.060 | 1.084 | 1.106 | 1.120 | 1.134 | 1.152 | 1.166 | 1.180 | 1.186 | 1.194 | 1.200 | 1.206 |
| 1 1/2″ | 0.740 | 0.820 | 0.900 | 0.932 | 0.982 | 1.024 | 1.060 | 1.094 | 1.140 | 1.170 | 1.204 | 1.232 | 1.260 | 1.282 | 1.310 | 1.334 | 1.356 | 1.370 | 1.384 | 1.402 | 1.416 | 1.430 | 1.436 | 1.444 | 1.450 | 1.456 |
| 1 3/4″ | 0.990 | 1.070 | 1.150 | 1.182 | 1.232 | 1.274 | 1.310 | 1.344 | 1.390 | 1.420 | 1.454 | 1.482 | 1.510 | 1.532 | 1.560 | 1.584 | 1.606 | 1.620 | 1.634 | 1.652 | 1.666 | 1.680 | 1.686 | 1.694 | 1.700 | 1.706 |
| 2″ | 1.240 | 1.320 | 1.400 | 1.432 | 1.482 | 1.524 | 1.560 | 1.594 | 1.640 | 1.670 | 1.704 | 1.732 | 1.760 | 1.782 | 1.810 | 1.834 | 1.856 | 1.870 | 1.884 | 1.902 | 1.916 | 1.930 | 1.936 | 1.944 | 1.950 | 1.956 |
| 2 1/4″ | 1.490 | 1.570 | 1.650 | 1.682 | 1.732 | 1.774 | 1.810 | 1.844 | 1.890 | 1.920 | 1.954 | 1.982 | 2.010 | 2.032 | 2.060 | 2.084 | 2.106 | 2.120 | 2.134 | 2.152 | 2.166 | 2.180 | 2.186 | 2.194 | 2.200 | 2.206 |
| 2 1/2″ | 1.740 | 1.820 | 1.900 | 1.932 | 1.982 | 2.024 | 2.060 | 2.094 | 2.140 | 2.170 | 2.204 | 2.232 | 2.260 | 2.282 | 2.310 | 2.334 | 2.356 | 2.370 | 2.384 | 2.402 | 2.416 | 2.430 | 2.436 | 2.444 | 2.450 | 2.456 |
| 2 3/4″ | 1.990 | 2.070 | 2.150 | 2.182 | 2.232 | 2.274 | 2.310 | 2.344 | 2.390 | 2.420 | 2.454 | 2.482 | 2.510 | 2.532 | 2.560 | 2.584 | 2.606 | 2.620 | 2.634 | 2.652 | 2.666 | 2.680 | 2.686 | 2.694 | 2.700 | 2.706 |
| 3″ | 2.240 | 2.320 | 2.400 | 2.432 | 2.482 | 2.524 | 2.560 | 2.594 | 2.640 | 2.670 | 2.704 | 2.732 | 2.760 | 2.782 | 2.810 | 2.834 | 2.856 | 2.870 | 2.884 | 2.902 | 2.916 | 2.930 | 2.936 | 2.944 | 2.950 | 2.956 |
| 3 1/4″ | 2.490 | 2.570 | 2.650 | 2.682 | 2.732 | 2.774 | 2.810 | 2.844 | 2.890 | 2.920 | 2.954 | 2.982 | 3.010 | 3.032 | 3.060 | 3.084 | 3.106 | 3.120 | 3.134 | 3.152 | 3.166 | 3.180 | 3.186 | 3.194 | 3.200 | 3.206 |
| 3 1/2″ | 2.740 | 2.820 | 2.900 | 2.932 | 2.982 | 3.024 | 3.060 | 3.094 | 3.140 | 3.170 | 3.204 | 3.232 | 3.260 | 3.282 | 3.310 | 3.334 | 3.356 | 3.370 | 3.384 | 3.402 | 3.416 | 3.430 | 3.436 | 3.444 | 3.450 | 3.456 |
| 3 3/4″ | 2.990 | 3.070 | 3.150 | 3.182 | 3.232 | 3.274 | 3.310 | 3.344 | 3.390 | 3.420 | 3.454 | 3.482 | 3.510 | 3.532 | 3.560 | 3.584 | 3.606 | 3.620 | 3.634 | 3.652 | 3.666 | 3.680 | 3.686 | 3.694 | 3.700 | 3.706 |
| 4″ | 3.240 | 3.320 | 3.400 | 3.432 | 3.482 | 3.524 | 3.560 | 3.594 | 3.640 | 3.670 | 3.704 | 3.732 | 3.760 | 3.782 | 3.810 | 3.834 | 3.856 | 3.870 | 3.884 | 3.902 | 3.916 | 3.930 | 3.936 | 3.944 | 3.950 | 3.956 |
| 4 1/4″ | 3.490 | 3.570 | 3.650 | 3.682 | 3.732 | 3.774 | 3.810 | 3.844 | 3.890 | 3.920 | 3.954 | 3.982 | 4.010 | 4.032 | 4.060 | 4.084 | 4.106 | 4.120 | 4.134 | 4.152 | 4.166 | 4.180 | 4.186 | 4.194 | 4.200 | 4.206 |
| 4 1/2″ | 3.740 | 3.820 | 3.900 | 3.932 | 3.982 | 4.024 | 4.060 | 4.094 | 4.140 | 4.170 | 4.204 | 4.232 | 4.260 | 4.282 | 4.310 | 4.334 | 4.356 | 4.370 | 4.384 | 4.402 | 4.416 | 4.430 | 4.436 | 4.444 | 4.450 | 4.456 |
| 4 3/4″ | 3.990 | 4.070 | 4.150 | 4.182 | 4.232 | 4.274 | 4.310 | 4.344 | 4.390 | 4.420 | 4.454 | 4.482 | 4.510 | 4.532 | 4.560 | 4.584 | 4.606 | 4.620 | 4.634 | 4.652 | 4.666 | 4.680 | 4.686 | 4.694 | 4.700 | 4.706 |
| 5″ | 4.240 | 4.320 | 4.400 | 4.432 | 4.482 | 4.524 | 4.560 | 4.594 | 4.640 | 4.670 | 4.704 | 4.732 | 4.760 | 4.782 | 4.810 | 4.834 | 4.856 | 4.870 | 4.884 | 4.902 | 4.916 | 4.930 | 4.936 | 4.944 | 4.950 | 4.956 |
| 5 1/4″ | 4.490 | 4.570 | 4.650 | 4.682 | 4.732 | 4.774 | 4.810 | 4.844 | 4.890 | 4.920 | 4.954 | 4.982 | 5.010 | 5.032 | 5.060 | 5.084 | 5.106 | 5.120 | 5.134 | 5.152 | 5.166 | 5.180 | 5.186 | 5.194 | 5.200 | 5.206 |
›Pressure Ratings
Pressure rating of Inconel Alloy 600 tubing
Scroll to see all columns →
| Grade | 700°F | 600°F | 500°F | 400°F | 300°F | 200°F | 100°F | Comments |
|---|---|---|---|---|---|---|---|---|
| N06600 :1 | 8.02 | 8.02 | 8.02 | 8.02 | 8.02 | 8.02 | 8.02 | OD>5" & hot worked |
| N06600 :2 | 9.6 | 9.6 | 9.6 | 9.6 | 9.6 | 9.6 | 9.6 | OD<=5" & hot worked + OD>5" & cold worked |
| N06600 :3 | 11.19 | 11.19 | 11.19 | 11.19 | 11.19 | 11.19 | 11.19 | OD<=5" & cold worked |
Inconel 600 Pipe
Get a Price
Request a quote for this item
Specify the grade, size, quantity and governing standard, and we'll confirm stock and pricing — typically within the same working day.
Contact
Send us the spec
Grade, form, size and quantity — that's all we need to confirm stock and quote. Reach us directly, or use the form below.
Enquiry FormReply same working day
Direct Contact
Head Office
Shop No. 5, Ravi Estate, Keval Kantha Road, Near Gujarat Bottling Road, Industrial Area, Rakhial, Ahmedabad, Gujarat – 380023, India
Phone / WhatsApp
+91 93240 06771Working Hours
Monday – Saturday8:00 AM – 8:00 PM
SundayClosed